Product Procurement & Buyer Guide
The 9200-03-05-05-00 is a two-wire velocity seismoprobe transducer from Bently Nevada. This model comes with a 1/2‑in 20 UNF‑3A stud mounting base and a terminal block top connector. Engineers select this variant for directly threaded installations on rotating machinery casings.
You gain a sensitivity of 20 mV/mm/s with ±5% accuracy. The transducer operates at a minimum frequency of 4.5 Hz (270 cpm) and mounts at a 90° angle. This configuration supports typical vibration monitoring for pumps, fans, and compressors.
The unit withstands temperatures from -29°C to +121°C. Its anodized aluminum case offers dust and moisture resistance up to 95% relative humidity. You can order it without additional agency approvals, reducing lead time for standard industrial applications.
Procurement teams value the 12‑month factory warranty and original packaging. The part number 9200-03-05-05-00 ensures correct specification matching. Ordering this exact variant eliminates compatibility risks with existing Bently Nevada monitoring systems.
Step-by-Step Installation Guide
Begin by cleaning the mounting surface. The 1/2‑in 20 UNF‑3A stud threads directly into a tapped hole on the machine casing. Tighten to the manufacturer’s recommended torque without over‑compressing the neoprene gasket.
Connect the terminal block top mount. Use a 10 kΩ calibration load across terminals “A” and “B”. The output signal appears between these two pins. Ensure the cable is shielded and routed away from high‑voltage sources.
Orient the transducer at exactly 90° ±2.5° relative to the measurement axis. This orientation matches the factory calibration angle. A deviation beyond this tolerance will reduce sensitivity accuracy.
Apply power through a two‑wire loop. The transducer draws its operating current from the same pair that carries the vibration signal. Confirm the monitoring module supplies at least 10 mA to the loop.
Verify the velocity range of 25 mm/s at 100 Hz with a 10 kΩ load. Use a handheld vibration calibrator to check output. The locked coil inductance of 125 mH ensures stable performance in noisy environments.
Logistics & Standard Packaging Details
- One Bently Nevada 9200-03-05-05-00 transducer
- Neoprene gasket pre‑installed
- Terminal block connector top mount
- Original factory packing with anti‑static foam
- Calibration certificate traceable to factory standards
Express delivery is available via FedEx, UPS, and DHL. Orders placed before 14:00 EST ship the same business day. Expedited air freight is also an option for critical outages.
