Product Summary
The Allen-Bradley 170ADM35015 is a robust ArmorPoint I/O module designed for distributed control in harsh industrial environments. This component provides reliable signal interface for demanding automation applications requiring high durability.
Core Technical Specifications & Parameters
The 170ADM35015 module operates as a key component within the ArmorPoint I/O family. This device supports a wide range of input and output configurations for flexible system integration. The module features a rugged IP67-rated enclosure that withstands dust and water immersion. Engineers will appreciate the module's ability to function in extreme temperatures from -20 to 60 degrees Celsius. The unit communicates via the DeviceNet network protocol for seamless data exchange. Power requirements for this module are 24 volts DC with a tolerance of plus or minus 10 percent. The module consumes a maximum current of 100 milliamps from the network power supply. Each module provides 16 digital input channels for connecting sensors and switches. The input voltage range is 24 volts DC with sink or source wiring compatibility. This module offers a high noise immunity rating for reliable operation in electrically noisy environments. The unit measures approximately 150 millimeters in length and 80 millimeters in width. The module weight is roughly 0.5 kilograms for easy handling during installation.
Professional Installation & Wiring Guidelines
Begin the installation process by mounting the 170ADM35015 module onto a standard DIN rail within the control panel. Ensure the mounting surface is clean and free from debris to guarantee a secure fit. Connect the DeviceNet trunk cable to the module's integrated bus connector for network communication. Wire the field devices to the module's M12 quick-disconnect connectors using appropriate cables. Verify that all wiring connections are tight and properly seated to prevent signal loss. Apply power to the module only after completing all wiring and mounting procedures. Configure the module's node address using the rotary switches located on the front panel. Set the network data rate to match the speed of your DeviceNet master scanner. Perform a continuity check on all signal wires before energizing the system for the first time. Follow all local electrical codes and safety regulations during the installation process.
Standard Packaging List & Logistics
- One Allen-Bradley 170ADM35015 ArmorPoint I/O module
- One product documentation sheet with quick start guide
- One bus connector for DeviceNet network integration
- One protective dust cap for unused M12 connectors
- Express delivery shipping is available via FedEx, UPS, and DHL
Frequently Asked Questions (FAQ)
What is the maximum cable length for the DeviceNet connection on this module?
The maximum trunk cable length depends on the selected data rate but typically reaches 500 meters at 125 kbps.
Can this module be used in a hazardous location environment?
Yes the module carries approvals for Class I Division 2 hazardous locations when properly installed.
How do I troubleshoot a module that is not communicating on the network?
Check the module status LED and verify the node address and data rate settings match the network configuration.
What is the recommended torque for the M12 connector screws?
Tighten the M12 connector screws to a torque of 0.4 Newton-meters for a secure and reliable connection.
Does this module support hot-swapping while the system is powered?
Yes the ArmorPoint I/O system supports hot-swapping modules without removing power from the network.
