Meta Attribute Data Block
- Series: 9200
- Product Type: Two-Wire Velocity Seismoprobe Transducer
- Product Category: Sensor, Tranducer & Probe
- Current Price: Contact for Quote
- Gross Weight: 300 grams (10.5 ounces) typical
Product Summary
The Bently Nevada 9200-03-06-10-00 is a robust two-wire velocity seismoprobe transducer designed for precise industrial vibration monitoring. This sensor delivers reliable performance in demanding environments with a sensitivity of 20 mV/mm/s.
Core Technical Specifications & Parameters
The 9200-03-06-10-00 model is a two-wire velocity seismoprobe transducer engineered for critical machinery protection. This device features a sensitivity of 20 mV/mm/s (500 mV/in/s) with a ±5% tolerance when properly terminated. The dynamic operating range allows for a maximum displacement of 2.54 mm (0.100 in) peak to peak. Its velocity range is 25 mm/s (1 in/s) at +22°C with a 10 kΩ load. The coil resistance measures 1.25 kΩ ±5% with a typical locked coil inductance of 125 mH. This transducer operates effectively across a temperature range from -29°C to +121°C (-20°F to +250°F). The device is dust and moisture resistant and can handle relative humidity up to 95% noncondensing. Its case and adapter are constructed from anodized aluminum A204 with a neoprene gasket. The transducer mounting angle is 90 ±2.5 degrees with a minimum operating frequency of 4.5 Hz. The connector option is 0 ±100 with a 10 Hz operating frequency. The mounting base is circular with an M10X1 stud. The sensitivity temperature coefficient is 0.2%/°C ensuring stable performance across varying thermal conditions.
Professional Installation & Wiring Guidelines
Proper installation of the 9200-03-06-10-00 transducer is essential for accurate vibration measurement. Begin by mounting the device at the specified 90-degree angle using the circular M10X1 stud base. Ensure the mounting surface is clean and free from debris to guarantee a secure fit. The output is taken across pins A and B with a calibration load of 10 kΩ. Connect the field wiring carefully to terminal A and terminal B for proper signal transmission. Verify that the transducer is oriented at the angle of calibration to achieve the specified sensitivity. The device is designed for dust and moisture resistant environments but should not be submerged unless ordered with an integral cable. Avoid exposing the transducer to temperatures outside the -29°C to +121°C range to prevent damage. Always terminate the output with a 10 kΩ load to maintain the calibrated sensitivity of 20 mV/mm/s.
Standard Packaging List & Logistics
- One Bently Nevada 9200-03-06-10-00 Two-Wire Velocity Seismoprobe Transducer
- Factory packing in original sealed packaging for maximum protection
- Mounting base with circular M10X1 stud included for installation
- Connector option as specified for the 06 configuration
- Express delivery shipping available via FedEx, UPS, and DHL
Frequently Asked Questions (FAQ)
Q: What is the sensitivity of the 9200-03-06-10-00 transducer?
A: The sensitivity is 20 mV/mm/s (500 mV/in/s) with a ±5% tolerance when properly terminated and oriented at the calibration angle.
Q: What is the operating temperature range for this model?
A: The operating and storage temperature range is -29°C to +121°C (-20°F to +250°F) for the standard 9200 transducer.
Q: How do I properly terminate the output of this transducer?
A: The output must be taken across pins A and B with a calibration load of 10 kΩ to achieve the specified sensitivity.
Q: What is the maximum displacement this transducer can measure?
A: The dynamic operating range allows for a maximum displacement of 2.54 mm (0.100 in) peak to peak.
Q: Is this transducer suitable for high humidity environments?
A: Yes, it can handle relative humidity up to 95% noncondensing and is dust and moisture resistant.
